Kolpin 10-0520 X-Factor Plow Manual do Utilizador descarregar pdf (Página 15)

OPTION A - GENERIC MOUNT INSTALLATION FOR ROUND TUBE FRAME ATVs

1. Position the Back Plate, Item #2, on top of the Forward Mount Weldment, Item #1, as shown in Illustration 10.

2. Position the forward mount weldment and back plate under the frame tubes at the “Y” location as shown in Illustration 1.

3. Fasten the mount and back plate using U-bolts, washers and locknuts, Items #4, #5 and #6. Do not torque fasteners at this time.

4. Position the mount and fasteners at a point on the frame that allows the push tube to be attached, but will not interfere with

operation of the ATV.

5. Once the mount position has been determined, position U-bolts to the frame tube walls as close as possible and torque to

specification.

NOTICE

Depending on application, some trimming

of plastic guards or panels may be required.

FASTENER TORQUE:

30 ft. lbs. (41 Nm)

ILL. 1

GENERIC ROUND TUBE FRAME SECTION

ATV FRONT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Sem comentários

Kolpin 10-0520 X-Factor Plow Manual do Utilizador Página 15